These tools are used typically in boilers and other larger tubes that have a light to medium deposit. These tools use the Powermaster patented ergonomic cutting wheels that ensure the same tooth of the cutter wheel does not touch the same spot when cleaning. This prevents grooves being formed in the tube scale. The cutters 'fly out' when the tool is rotated and perform cleaning action.
| Tube I.D. | Cylinder Cutter Tool Model | Spare Cylinder Cutter Model | |
| inch | mm | ||
| 1.7/16-1.7/8 | 36.5-47.6 | CCT-1438 | CYC-1438 |
| 1.13/16-2.7/8 | 46.0-73.0 | CCT-1813 | CYC-1438 |
| 2.3/16-3.3/16 | 55.5-81.0 | CCT-2188 | CYC-2188 |
| 3.1/8-3.7/8 | 79.4-98.4 | CCT-3125 | CYC-2188 |
These tools use long stiff arms with Powermaster patented cone cutters on their ends, that spread out when rotated. These tools are used to clean light to medium deposits in large diameter tubes and pipes.
| Tube I.D. | Wing Tool-Stiff Arm Cutter Model | Spare Cone Cutter Model | |
| inch | mm | ||
| 1.11/16-4 | 42.9-101.6 | WTS-1688 | SCT-937 |
| 3.15/16-6.1/2 | 100.0-165.1 | WTS-3938 | SCT-937 |
These tools are similar in operation to the Stiff Arm Winged Tools, but the Powermaster patented Cone Cutters are attached onto flexible arms. These tools are used in typically very large vertical pipes and are used in cleaning pipes from top to bottom.
| Tube I.D. | Wing Tool-Flexible Arm Cutter Model | Spare Cone Cutter Model | |
| inch | mm | ||
| 3.15/16-12 | 100.0-309.0 | WTF-3938 | SCT-937 |
These tools are similar in operation to the Flexible Arm Cutter Wing Tools except these use carbide balls for removing light scale in large diameter tubes and pipes.
| Tube I.D. | Wing Tool-Flexible Arm Carbide Ball Tip Model | Number of Balls Used | |
| inch | mm | ||
| 15-16-2.1/16 | 23.8-52.4 | WTC-938 | 4 |
| 1.15/16-4.1/16 | 49.2-103.2 | WTC-1938 | 6 |
| 3.15/16-8.1/16 | 100.0-204.8 | WTC-3938 | 6 |
